HOW TO CONVERT A SMARTPHONE CHARGER INTO A WIRELESS CHARGER

Hey guys, in this guide you’ll learn how to convert a smartphone charger into a wireless charger using a simple method discussed in the article ahead.

Our life has become much easier and joyful with a smartphone. Using your smartphone while charging is not a recommended act, but sometimes you may have something importance doing and while your smartphone is running on a low battery, you definitely have to finish that task before your phone goes off. But smartphone chargers often time is not enough to keep the distance between charging and usage of your smartphone.

Read also: HOW TO USE AN ANDROID SMARTPHONE/TAB AS SECOND MONITOR FOR PC/MAC

But what if you can turn that smartphone charger into a wireless charger and still use your phone from a distance. Is this even possible? Yes, you can actually convert your smartphone charger into a wireless charger. With this simple hack, you can still charge your phone from a distance of about 50ft. away from the power source.

Read also:  How to Transfer Your Windows OS To A New Hard Drive Without Reinstalling Windows

How to Convert a Smartphone Charger Into a Wireless Charger

For this trick, you require some cheap and affordable material which you can also get around you or from the gadget you no longer find useful at home.

       Prerequisites:

  • Smartphone charger adapter
  • USB cable
  • Aluminium foil
  • Copper wire
  • Electric tape
  • Magnet (With a definite shape and not broken)
  • Scissors

Without further ado, let’ dive into the steps of making a wireless charger

Steps to Convert a Smartphone Charger Into a Wireless Charger

Step 1. Pick your USB cable, cut it nearly at both ends, carve out part of the insulated cover of both wires as shown below.

Read also: HOW TO CHANGE DEVICE STOCK DPI ON ANY ANDROID SMARTPHONE

Step 2. Cut out a piece of the Aluminum foil and use it to wrap the naked parts of both wires gotten from step 1, as shown below.

Step 3. Now tie some strings of copper wire around both USB ports.

Read also:  You Can Monitor Your Heart Rate And Blood Pressure With This $26 Feature Phone

Step 4. In the same region, cover the part with your electric cable and repeat step 3. See example in step 6.

Step 5. Pick up your magnet and place it on the top / left side of your adapter for proper wireless connection.

Step 6. Now connect both USB ports to their respective device and plug the adapter into a power source and watch your smartphone charge. These are the simple tweaks behind the hack. If you do not understand the steps explained above. I might make a short video on that from start to finish.

Read also: How to Make a Password Protected Zip File With 7Zip

That’s it, now you’ve learnt how to convert a smartphone charger into a wireless charger. This is a simple home hack and if you find this post helpful, share it with your friends.


JOIN OUR TELEGRAM CHANNEL — CLICK HERE

10 COMMENTS

  1. After wrapping the electrical insulator on both pins, do u again wrap copper wire on the pin that enters in the phone on both positive and negative or u also apply another type of wire. And do u use insulated copper wire or no insulated. Thanks.

  2. This is fake. The principle of wireless charging is bases on magnetic inductance coupling which requires a high frequency ac current and 2 or more flat beds of inductance wire to serve as the transmitter and receiver. What you’ve demonstrated is either a joke or complete nonsense.

LEAVE A REPLY

Please enter your comment!
Please enter your name here