On this page, you’ll find the step by step guide to flash any MediaTek device using SPflashtool.
Most of you guys might already be familiar with flashing of Android devices, but for the newbies searching for how to flash Android smartphone, just follow the step by step guide in this tutorial.
How to flash any MediaTek device using splash tool
Smart Phone Flash Tool (SP Flash Tool) allows you to Flash Stock ROM, Flash Recovery, Memory Test, Upgrade Firmware etc. on any Android Smartphone. In this tutorial, we are going to talk about the Smart Phone Flash Tool, its features and how to use it on any Android Smartphone
Smartphone Flash Tool Features;
- Flash Stock Rom
- Flash Recovery
- Memory Test
- Parameter Setting
- Format Device / Hard Reset.
How To Flash Any Android Device Using SPflashtool
- Note: Installing vcom driver on Windows 8 and 10 requires drivers signature disabled
- To disable driver signature simply run the command below on cmd
- Run Command prompt as admin and enter the below syntax
Step 2: Download and Extract SPFlash Tool on Your Computer and extract it to a folder
Also Read: HOW TO LOCK SPECIFIC APPS IN WINDOWS 10 PC
Step 3: Download the Stock ROM of your device and extract it on your computer.
Step 4: Power Off your device and remove the Battery (if it is removable). Step 5: Now Open Flash_tool.exe (you will find these files in the extracted folder in Step#2).
Step 6: Once SP Flash Tool is launched, Click on the Download Tab.
Step 7: On the Download Tab, click the scatter-loading button.
Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).
Step 9: Now, Click on the Download Button to begin the Flashing Process
Step 10: Now, Connect your Smartphone which you powered off earlier to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer, insert the battery and sit back.
Step 11: Once Flashing is completed, a Green Ring will appear.
Congratulations, Now your Android Smartphone is successfully running the Stock ROM you have Downloaded, you can now close the SP flash tool and disconnect your device. Also, you can flash any custom recovery using the flashing method explained above. Share with friends if you consider this post helpful