Download factory signed Infinix S5 X652A firmware/Stock ROM to restore your dead, bricked or virus-infected Infinix S5 device. If you’re an engineer and searching for Infinix S5 X652A firmware to download and fix a customers device, then, search no more.
Infinix S5 was launched in October 2019, a sequel to the Infinix S4 which launched in March 2019. Infinix S5 comes with little but noticeable upgrades over the Infinix S4, from screen size to memory (RAM/ROM), camera, design and performance. A quick spec is shown after the next paragraph.
If by mistake you bricked your Infinix S5 X652Awhether you were trying to obtain root access, install a custom rom/recovery, or maybe it crashed during an OTA update, you’ll need the Infinix S5 X652A stock ROM to get your device working properly again.
Infinix S5 Key Specs and Features
- Display: 6.6 inch IPS LCD hole-punch display, 720 x 1600 pixels, 20:9 aspect ratio (~270 ppi density)
- OS: Android 9.0 Pie
- Processor: Mediatek MT6762 (Helio P22 (12nm))
- Memory: 4GB/64GB, 6GB/64GB storage upgradeable up to 256GB
- Camera: 16MP + 5MP + 2MP – QVGA Quad rear Camera; 32MP Selfie snapper
- Battery: 4000 mAh Non-removable Li-Po Battery
Why you need Infinix S5 X652A firmware file
There are several reasons as to why you may need Infinix S5 X652A firmware file, some include;
- Recover your device from a brick (whether soft or hard brick).
- Fix boot loop caused by either a system update or changes you made in your device core files or apps.
- To upgrade or downgrade your OS version on your Infinix Hot 8 device.
- To fix bugs, remove virus and lags on your Android Device.
- Remove/bypass FRP
- For modifying your system files.
- Fix IMEI and baseband issues etc.
- Name: Infinix S5
- Model: X652A
- Chipset: MediaTek MT6762
- Kernel: 4.9.117+
- OS version: Android 9.0 Pie
- Bootloader: Locked
- Device Supported: Infinix S5 X652
- Tool Supported: SP Flash Tool, After sales flash tool, Miracle box etc
- Processor: MediaTek MT6762
- Android OS: 9.0 Pie – Gapp Included
- File: Factory Signed
Infinix S5 X652A Firmware Download
How to flash Infinix S5 X652A Firmware
To flash the Infinix S5 X652A Stock firmware on your device you need to have the following;
- Android Vcom drivers installed on your PC
- AfterSales Flash tool (Recommended)
- SPFlashtool (smartphone flash tool)
- Miracle box or any other smartphone box
- A PC and of course a USB cable
Steps to Flash Infinix S5 X652A Firmware
- If you haven’t downloaded Infinix S5 X652A factory firmware already, simply download from the above links.
- Download Infinix S5 X652A DA file, check the link below.
- Now extract the downloaded Infinix S5 X652 firmware to a folder on your desktop or anywhere you want it.
- Launch SP flash tool or aftersales flash tool on your PC or laptop.
- Now, load Infinix X652A scatter file into the flash tool.
- Once the component files have been loaded into the flash tool, set the download option to download only.
- Now, click on the start button to commence the flashing process.
- Power off your device and connect to the PC via USB cable.
- If vcom drivers are properly installed, SPFT /AfterSale tool will detect your device and begin a download process on the screen.
- Do not interrupt this download process for any reason.
- Once the download process is complete, you’ll get a green circle pop-up on the screen/ok.
- You can now disconnect your device from PC/laptop and power on.
The first boot might take a while, it’s nothing to worry about. It should take around 5-10minutes, so don’t panic.
That’s it you’ve successfully restored your Infinix S5 X652A. If the above guide is not clear enough, please refer to our detailed guide on how to flash a device using sp flash tool here.
If our Infinix S5 X652A firmware fixed your device, don’t forget to spread the love using our social share buttons below. Also, if you encounter any issue trying to flash the device, tell us in the comment section below.