TWRP for Tecno Spark 3 Pro
TWRP Custom Recovery for Tecno Spark 3 Pro

In the past we’ve talked about how to root and install TWRP on Tecno Spark 3 KB7, now you can download the latest TWRP for Tecno Spark 3 Pro and root your device, take nandroid backup, flash custom roms and mods etc.

On this page, you’ll find TWRP recovery for Tecno Spark 3 Pro and step to root your Tecno Spark 3 Pro device. This is TWRP for MT6761 on Android 9.0 Pie kernel, you can download and port this recovery for your Android 9.0 device.

Team Win Recovery Project is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system which is functions often unsupported by stock recovery images.

Follow the guide ahead to install TWRP For Tecno Spark 3 Pro.

TWRP 3.3.1 Features:

  • Fix automatic installing of OTA zips on encrypted devices
  • Remove SuperSU from TWRP
  • Support both md5 and md5sum file extensions when doing MD5 checking for zip files
  • Install Zip (From SD Card, Internal Storage, OTG Storage)
  • Advanced Wipe Menu (Dalvik, System, Cache, Data,
  • Internal Storage, SD Card, USB OTG)
  • Advanced (Backup | Restore) Menu
  • Advanced Mount Options
  • TWRP File Manager
  • Advanced Reboot Option
  • Completely Material Themes
  • Easy And Simple
  • Proper Detail Of Task
  • Showing Progress In Percentage
  • Automatically Flash More Than One Zip File One By One
  • File Manager
  • Brightness Control
  • Full Touch control

What’s New in TWRP 3.3.1

Disclaimer: Make sure you have backed up every all your important files and data before proceeding with the guides ahead, all file and data stored on your internal storage will be lost in the process of flashing TWRP for Tecno Spark 3 Pro and removing force encryption. This Site or its author won’t be responsible for bricking of your device.

Read also:  Pitch Black TWRP Custom Recovery For Tecno Camon CX Air

Why you need TWRP for Tecno Spark 3 Pro

With TWRP for Tecno Spark 3 Pro (custom recovery for Tecno Spark 3 Pro) you can perform the following operations listed below;

  • Install custom ROMs (upgrade your device to a newer Android Version)
  • Take Nandoid backup (full Android system backup)
  • Flash performance mods, Sound mods and graphics mods.
  • Root your device etc.

Screenshots:

TWRP for Tecno Spark 2 KA7
TWRP 3.3.1

Recovery Info:

- Recovery Name: TWRP 
- Recovery Version: v3.3.1
- Recovery Status: Stable
- Current Stable Version: Unofficial
- Supported Language: Multi-Language Support

Device Info:

- Device name: Tecno Spark 3 Pro
- Device model: KB8
- Stock OS Version: Android 9.0 Pie
- Chipset: MediaTek – MT6761
- Kernel: Stock Kernel   
- Bit Version: 32-bit (Arm86)

How to install TWRP for Tecno Spark 3 Pro

Installing TWRP custom recovery on your Tecno Spark 3 Pro is simply, you just have to follow the step by step guide below carefully to avoid the risk of damaging your device. This recovery should not be flash on Tecno Spark 3 Pro on Android 10.

Steps To Install TWRP for Tecno Spark 3 Pro

For this tutorial, you need to first download TWRP for Tecno Spark Go from the link below

Step 1. Unlocking Bootloader

1. Go to about phone on your device and enable developer option on your device by tapping the build number continuously until you see you’re now a developer.

2. Now, go back to the settings list under the system and select the developer option.

3. In developer option, enable OEM unlocking and USB debugging.

4. Now download and install minimal adb and fastboot tool on your PC.

5. Once, you’ve installed adb and fastboot tool on your PC, launch it and connect your device.

6. Now, enter the following commands below.

adb devices

You should get a prompt on your phone’s screen to grant access permission, accept the permission.

Read also:  BLESS Android 10 ROM For Tecno Camon iSky 2 IN1 Pro

7. Now, we’ll reboot into device bootloader by using the below command.

adb reboot bootloader

8. Once your device reboot into the bootloader, you now have to unlock your bootloader using the command below.

fastboot oem unlock

Step 9. Now, when the unlock process is done, reboot your device using the command.

fastboot reboot

Wait for your device to boot. On boot, you’ll notice a warning text that your device is now unsecure blah blah blah. You don’t have to panic, your device is ok.

Now, you’ve successfully unlocked your device bootloader

Step 2. Flashing TWRP

  1. Boot your device into fastboot mode again and flash the TWRP recovery using this command fastboot flash recovery recovery.img
  2. Once that is done, boot into recovery (Power + Volume Up) to confirm that you have successfully flashed TWRP on your Tecno Spark Go KC1
  3. While TWRP is trying to load to the main menu, if you’re asked for a password to decrypt your device, just ignore that step, then, go to the Wipe Menu and Format Data.
  4. Wiping data will wipe all your data so make a point of backing up your important data.
  5. Now reboot

After the long process is done, you’ve now successfully flashed TWRP recovery for Tecno Spark 3 Pro

How to root Tecno Spark 3 Pro

  1. Download the latest Magisk manager zip file
  2. Boot your device into TWRP recovery mode
  3. In recovery, flash Magisk manager and make sure you don’t wipe anything
  4. Just flash Magisk manager and reboot.

Download TWRP for Tecno Spark 3 Pro

[Locker] The locker [id=2522] doesn't exist or the default lockers were deleted.

Credits

- Unofficial TWRP
- Mudsiru Adewale (for porting)
- And all testers participated on this project.

JOIN OUR TELEGRAM CHANNEL — CLICK HERE

10 COMMENTS

  1. Gsi images put my Tecno spark 3 pro in bootloop, please can you put me through on how to install them using fastboot? And what architecture (arm) I should download.

    • To determine the arm version of rom to flash, install this app to get your device architecture information Treble checker

      To flash ROM with ADB, follow the simple steps.

    • Perform a factory reset on your device.
    • Once your device has been factory reset, boot your device into fastboot mode
    • Erase your system partition using the following command: fastboot erase system
    • Flash the GSI with the command: fastboot -u flash system name_of_system.img
    • Reboot once flash is complete.
    • In case your device doesn’t boot after the flash, try flashing your devices vbmeta.img

LEAVE A REPLY

Please enter your comment!
Please enter your name here